DigiGuard® UV 2000
Brand Family Overview
ACqua™ aqueous dispersions offer an environmentally-friendly metal protection alternative. Based on ionomers of ethylene copolymers, these coatings resist acids, solvents and corrosion.See more ACqua products.
Designed to be applied in-line over UV or hybrid UV ink systems and aqueous or UV flexo ink and provides excellent gloss and adhesion to HP Indigo inks.
UV overprint varnish
This product is used in many applications including the following:
|Overprint Varnish||high gloss, satin finish, UV coating|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||99.0 - 100.0|
Site of Manufacture (and Product Code)
Typical applications include sheet-fed or reel-to-reel printing on paper or paperboard substrates where excellent gloss and minimal gloss-back are desired. DigiGuard® UV 2000 should be evaluated in the laboratory using the actual ink system and substrate to ensure that leveling, intercoat adhesion, gloss and other performance characteristics are acceptable. In general, UV coatings may not exhibit complete intercoat adhesion over some ink systems. A primer may be considered for use if this property needs to be improved.
Avoid contact with eyes, skin and clothing. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.