DigiPrime® 680

Brand Family Overview

CleanGrip® is a sprayable water-based coating applied by bag manufacturers and corrugators to reduce the skid of paper packaging. Made of high-performance silica, it eliminates the build-up and clogging associated with alumina nonskids.

See more CleanGrip products.

Usage

Imparts a print-receptive surface to film and metalized film substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo WS6000 series Digital Press.

Description

Primer for Digital Printing

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
HP Indigo SolutionsApplicator - Indigo ILP station, OEM - Indigo 8000, OEM - Indigo ws6000, Substrate - film

See more products recommended for HP Indigo Solutions.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceClear Liquid
pH9.5 - 11.5
Brookfield Viscosity (cps, mPa·s) 8 - 25
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

CIN (DP680)
AUB (DP680.E)
SNG (DP680.S)

Application Data

Used on Indigo WS6000 Digital Press. Clean up must be accomplished with soft water while the applicator roll is still damp. In case the primer dries, residue may be cleaned by scrubbing with soap and water. For hard residues, a mix of caustic solution might be used. Do not diulte.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.