Michem® Coat 90
Brand Family Overview
CleanGrip® is a sprayable water-based coating applied by bag manufacturers and corrugators to reduce the skid of paper packaging. Made of high-performance silica, it eliminates the build-up and clogging associated with alumina nonskids.See more CleanGrip products.
Multipurpose barrier coating particularly suited for two-sided coating jobs due to its printable and cold set gluable qualities. The coating imparts excellent water resistance, very good MVTR protection, and good oil resistance. It resists blocking in hot, moist stacks of corrugated board, resulting in excellent dyne stability. Michem® Coat 90 may be used alone as a single bump, or as a basecoat for other barrier-enhancing Michelman coatings.
Water resistant, moisture barrier coating with good anti-blocking characteristics.
This product is used in many applications including the following:
|Perishables||grease & oil resistance, MVTR, water resistance|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 10.0|
|Brookfield Viscosity (cps, mPa·s)||300 - 800|
Site of Manufacture (and Product Code)
Michem® Coat 90 is best applied on an offline coater. It can also be applied in line at the wet end of a corrugator. Dry end application is not recommended.
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.