Michem® Flex P2312
Brand Family Overview
CleanGrip® is a sprayable water-based coating applied by bag manufacturers and corrugators to reduce the skid of paper packaging. Made of high-performance silica, it eliminates the build-up and clogging associated with alumina nonskids.See more CleanGrip products.
A primer for film, metalized film, printed film, and paper substrates to promote excellent adhesion to extrusion coated resins resulting in high bond strength for dry and low moisture package contents. It creates very strong adhesion between treated film and PE extrudate. It may also be used on film substrates to promote adhesion to liquid top coats such as Michelman heat seal coatings and acrylic coatings.
Water-based primer for extrusion coatings and water based coatings.
This product is used in many applications including the following:
|Extrusion Coating Primers||adhesion for film|
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|pH||10.0 - 12.0|
|Brookfield Viscosity (cps, mPa·s)||20 - 50|
Site of Manufacture (and Product Code)
Michem® Flex P2312 is designed specifically for use as an extrusion primer. EZ Cup viscosity #2 Cup, 23 25 sec. Recommended application weight for film substrates is 0.025 - 0.075 dry g/m2 (0.5-1.5 wet g/m2).