Michem® Prime 8515
Brand Family Overview
CleanGrip® is a sprayable water-based coating applied by bag manufacturers and corrugators to reduce the skid of paper packaging. Made of high-performance silica, it eliminates the build-up and clogging associated with alumina nonskids.See more CleanGrip products.
Michem® Prime 8515 is a low temperature heat seal coating for plastic films for flexible packaging applications. It is optimized to give high hot tack over a wide temperature range. It should be used with the addition of a carnauba wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160PFP.E.
water based heat seal coating
This product is used in many applications including the following:
|Heat Seal Coatings||Substrate - film|
See more products recommended for Heat Seal Coatings.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 9.5|
|Brookfield Viscosity (cps, mPa·s)||<400|
Site of Manufacture (and Product Code)
Michem® Prime 8515 can be applied via flexo , gravure or roll coater.