Ecrovin® LV 470

Brand Family Overview

The Coating X300™ line combines two properties critical to packers of perishables and building products: water resistance and release. It's nonabrasive, repulpable, and hot-melt gluable.

See more Coating X300 products.

Usage

Provides good blocking resistance and high gloss in latex paints. This product is APE free.

Description

Terpolymer emulsion based on vinyl acetate/vinyl versatate/maleic acid ester

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Building Paintsblock resistance, gloss enhancement

See more products recommended for Building Paints.
Physical Properties

These physical properties are typical but should not be considered specifications.

Appearancewhite liquid
pH3.0 - 6.0
Brookfield Viscosity (cps, mPa·s) 3000 - 9000
Spindle Number5
RPM20

Site of Manufacture (and Product Code)

RECK (EVLV470.R)

Application Data

This emulsion is compatible with most additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of product in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycol ether. For Storage and Safety information see Material Safety Data Sheet.