Michem® Emulsion 1270
Brand Family Overview
The Coating X300™ line combines two properties critical to packers of perishables and building products: water resistance and release. It's nonabrasive, repulpable, and hot-melt gluable.See more Coating X300 products.
Provides slip and block resistance in a wide variety of coatings and formulas. It has very broad global food contact compliance, combined with a wide pH compatibility. It is a more cost effective solution than Michem® Emulsion 13025P.
Nonionic carnauba emulsion
This product is used in many applications including the following:
|Functional Coatings||block resistance, slip and lubricity|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Tan, low viscosity liquid|
|pH||8.0 - 11.0|
|Brookfield Viscosity (cps, mPa·s)||40 max|
Site of Manufacture (and Product Code)
Michem® Emulsion 1270 should be added at a few percent solids (typically 2 to 4%) in your coating, with adequate mixing.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.