Michem® Flex P1850

Brand Family Overview

The Coating X300™ line combines two properties critical to packers of perishables and building products: water resistance and release. It's nonabrasive, repulpable, and hot-melt gluable.

See more Coating X300 products.

Usage

Promotes adhesion to extrusion coated resins resulting in exceptionally high bond strength for film, metal and paper substrates. This product is recommended for off-line processes as it will not block in a rewound roll.

Description

Water based primer for liquids and extrusion coated resins.

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Extrusion Coating Primersadhesion for film

See more products recommended for Extrusion Coating Primers.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, translucent liquid
pH8.0 - 10.0
Brookfield Viscosity (cps, mPa·s) <100
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

CIN (MFP1850)
AUB (MFP1850.E)
SNG (MFP1850.S)

Application Data

Michem®Flex P1850 may be applied via flexo, gravure or smooth roll coater. Corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is best for off-line processes, as it will not block in a rewound roll. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.