Concrete

Michem® Seal products are fully formulated concentrates; specific grades are designed for dilution followed by application onto concrete surfaces, or direct incorporation into cementitious mixtures. For maximum formulation flexibility, our extensive line of Michem surface additives, NatureShield® natural oil emulsions and Ecronova® polymers add specific attributes to water-based protective and cure and seal formulations.

Polymers for Concrete MFFT (°C) % Non-Volatile adhesion alkali resistance block resistance chemical resistance flexibility minimal whitening water resistance weatherability

Ecronova® DA 171

(Water-based styrene-acrylic dispersion.)

Designed for hydraulic lime mortars, cementitious insulation coatings, rook coatings and crack bridging systems, it provides excellent adhesion, and very good flexibility.

0 49.0 - 51.0            

Ecronova® DA 196

(Water-based styrene-acrylic dispersion)

Designed for hydraulic lime mortars, cementitious insulation coatings, roof coatings, liquid foils and crack bridging systems, it provides very good weatherability, water resistance, flexibility, and excellent self-levelling behavior.

0 56.0 - 58.0          

Ecronova® LIQ 8030

(Water-based acrylate copolymer emulsion)

Provides chemical resistance for the formulation of cementitious mortars and insulation coatings.

14 52.0 - 54.0              

Ecronova® RA 127

(Water-based acrylic dispersion)

This APEO free emulsion provides transparency, low whitening, and block resistance for transparent filler for stone carpet.

18 49.0 - 51.0            

Ecronova® RA 50 N eco

(Water-based acrylic dispersion)

Provides adhesion and good penetration in solvent free primers and is APEO free.

0 35.0 - 37.0            

Ecrothan® 440

(Water-based acrylic-polyurethane dispersion)

Provides chemical, abrasion and scratch resistance for pigmented floor coatings and parquet lacquers.

15 38.0 - 40.0              
Additives & Modifiers for Concrete Available Form % Non-Volatile Emulsifier Charge block resistance chemical resistance curing control graffiti resistance release scratch resistance slip resistance stain and dirt resistance water beading water repellence water resistance

Michem® Emulsion 19815

(Modified polypropylene wax emulsion)

Provides good scratch resistance and anti-slip properties for concrete applications.

Emulsion 14.5 - 15.5 Anionic / Nonionic                  

Michem® Emulsion 34935

(Anionic paraffin/ethylene acrylic acid wax emulsion)

Provides excellent water beading and is primarily used for water resistance in wood coatings.

Emulsion 34.5 - 35.5 Anionic                    

Michem® Emulsion 47950

(Nonionic paraffin emulsion)

Effective as a sacrificial anti-graffiti coating and can also contribute water and corrosion resistance to industrial and wood coatings. This product also provides lubricity and serves as a mold release for industrial molding applications.

Emulsion 49.0 - 51.0 Nonionic                

Michem® Emulsion 52830

(Anionic polyethylene wax emulsion)

Provides water resistance for stucco coatings as well as release for anti-grafitti coatings.

Emulsion 29.5 - 30.5 Anionic                    

Michem® Emulsion 62330

(Anionic paraffin/polyethylene coemulsion)

This fine particle sized emulsion provides excellent water repellency, corrosion resistance, block resistance and lubricity when added to varnishes and other coatings, without affecting gloss.

Emulsion 29.5 - 30.5 Anionic                  

Michem® Emulsion 66035

(Anionic paraffin/polyethylene wax coemulsion)

An excellent waterbeading agent for exterior coatings providing early water beading and anti-blocking properties as well. It also is successfully used for hot tire scuff resistance in asphalt.

Emulsion 34.5 - 35.5 Anionic              

Michem® Emulsion 70750

(Anionic scale wax emulsion)

Imparts excellent early water resistance and release properties when used as an additive in wood coatings, furniture coatings and other water based coatings when additional water resistant properties are needed.

Emulsion 48.0 - 52.0 Anionic              

Michem® Emulsion 71150

(Anionic scale wax emulsion)

A stable high solids water resistant additive for coatings. It is also effective in controlling concrete curing and providing donnability and release for industrial molding applications.

Emulsion 50 - 51 Anionic                    

Michem® Lube 190

(Anionic polyethylene wax emulsion)

Provides mar, rub, block and scratch resistance as well as improved water resistance in coatings and graphic arts formulations.

Emulsion 34.5 - 35.5 Anionic                    

Michem® Lube 743P

(Nonionic paraffin wax emulsion)

Michem® Lube 743P exhibits a high degree of water resistance and is used in many water based coating applications to increase water resistance and/or surface slip.

Emulsion 31.5 - 32.5 Nonionic                  

NatureShield® 30

(Anionic tung oil emulsion)

Containing 99.5% natural ingredients, this additive imparts good water bead to wood and concrete coatings.

Emulsion 29.5 - 30.5 Anionic                  

NatureShield® 40

(Anionic boiled linseed oil emulsion)

A natural oil emulsion that imparts water resistance to wood and concrete.

Emulsion 39.5 - 40.5 Anionic                  

NatureShield® 41

(Anionic linseed oil emulsion)

A natural oil emulsion which imparts water resistance to wood and concrete. It also provides a wet look to stone surfaces. As a penetrating oil emulsion, it highlights the grain of wood substrates. The drying effect of the emulsion provides a moderate resistance to scratching.

Emulsion 39.5 - 40.5 Anionic                  

Contact Michelman for more information or to request a sample.