Provides very good abrasion protection for enamel coated metal surfaces, as well as many plastic surfaces. It is gluable with cold set and hot melt adhesives.
This product is used in many applications including the following:
|Perishables||abrasion resistance, non-whitening|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||8.0 - 9.5|
|Percent Non-Volatile||24.0 - 26.0|
|Brookfield Viscosity (cps, mPa·s)||100 - 600|
Site of Manufacture (and Product Code)
Nomar® 73 was designed for rod or blade application. It can be applied offline or in-line on a corrugator. It is also suitable for flexo application.