Michem® Coat 40W AFP
Brand Family Overview
Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.See more Ecronova KDA products.
Water resistant coating with excellent cold set gluability.
Water resistant, gluable coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||7.0 - 9.0|
|Percent Non-Volatile||29.0 - 31.0|
|Brookfield Viscosity (cps, mPa·s)||450 - 950|
Site of Manufacture (and Product Code)
Michem® Coat 40W AFP can be applied at the wet or dry end of the corrugator using either a blade or rod coater. It can also be applied offline.
Handle in accordance with good industrial hygiene and safety practice.