Michem® Coat 82
Brand Family Overview
Ecronova® KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.See more Ecronova KDA products.
A repulpable, printable, and cold set gluable coating optimized for water resistance and higher COF. It also offers intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal basecoat for other barrier-enhancing Michelman coatings.
Water resistance coating with intermediate moisture barrier and higher COF.
This product is used in many applications including the following:
|Perishables||MVTR, water resistance|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 9.5|
|Percent Non-Volatile||50.0 - 52.0|
|Brookfield Viscosity (cps, mPa·s)||400 - 700|
Site of Manufacture (and Product Code)
Michem® Coat 82 is best applied via off-line rod coater or in-line at the wet end of the corrugator. Dry end application is not recommended. Dilution is not recommended.
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.