Michem® Coat 95

Brand Family Overview

Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.

See more Ecronova KDA products.


A good multi-purpose coating that provides excellent water, oil and grease resistance. This product is heat sealable and cold set gluable as well.


Water and grease resistant, heat sealable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Heat Seal CoatingsSubstrate - paper
Food Servicegrease & oil resistance, water resistance
Perishablesgrease & oil resistance, water resistance

See more products recommended for Heat Seal Coatings.
See more products recommended for Food Service.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceOff-white liquid
pH8 - 8.6
Percent Non-Volatile46.0 - 48.0
Brookfield Viscosity (cps, mPa·s) 250 - 650
Spindle Number3

Site of Manufacture (and Product Code)

CIN (MC95)
AUB (MC95.E)
SNG (MC95.S)

Application Data

Michem®Coat 95 is designed to be flexo or gravure applicable. For use as a heat seal coating on paper at a dry coating weight between 4 - 6gsm is recommended. Typical sealing conditions are 140-200C, 4 bar pressure, 1 sec dwell time. EZ Cup Viscosity = 20 - 40seconds, #3 Cup.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.