Michem® Flex P1831

Brand Family Overview

Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.

See more Ecronova KDA products.


Promotes adhesion to many extrusion coated resins resulting in high bond strength for film, metal and paper substrates.


Water based primer for liquids and extrusion coated resins.

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Extrusion Coating Primersadhesion for film

See more products recommended for Extrusion Coating Primers.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite translucent liquid
pH8.0 - 10.0
Emulsifier ChargeAmmoniated dispersion
Percent Non-Volatile27.5 - 29.0
Brookfield Viscosity (cps, mPa·s) <100
Spindle Number3

Site of Manufacture (and Product Code)

CIN (MFP1831)
AUB (MFP1831.E)
SNG (MFP1831.S)

Application Data

Michem®Flex P1831 may be applied via flexo, gravure or smooth roll coater. When possible, corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. May be used for in-line or off-line processes. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #3 Cup, 8-13 sec.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.