Michem® In-Line Primer Q4304A
Brand Family Overview
Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.See more Ecronova KDA products.
Designed as a primer for HP Indigo substrates to render them compatible to ink. It can be used on coated papers on the in-line priming unit on the W3250 press.
Print receptive primer
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - Indigo ILP station, OEM - Indigo ws3250, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|pH||10.4 - 11.4|
|Percent Non-Volatile||2.4 - 2.7|
Site of Manufacture (and Product Code)
Michem® In-Line Primer Q4304A can be applied using the in-line primer unit on the W3250 press. The recommended dry coat weight is 30 to 60 mg/m². Use our Sapphire Indicator Solution to check quality of the coating. The anilox should be kept turning at all times to avoid premature drying of the solution. Cleaning with warm water, IPA or slightly acidic water is recommended. ISO Cup Viscosity - #3 Cup 21-27 sec. Do not dilute.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.