Michem® Lube 160RPH

Brand Family Overview

Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.

See more Ecronova KDA products.


APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.


Slip and anti-block properties

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Functional Coatingsblock resistance, slip and lubricity

See more products recommended for Functional Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceCream colored, opaque liquid
pH4.0 - 7.0
Percent Non-Volatile24.5 - 25.5
Brookfield Viscosity (cps, mPa·s) <15
Spindle Number1

Site of Manufacture (and Product Code)


Application Data

To be used as additive.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.