Brand Family Overview
Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.See more Ecronova KDA products.
Designed to reduce hot plate frictional drag and improve board quality, this paper lubricant is applied to linerboard at the wet end of the doublebacker. In addition, PCL500 eliminates the smoky vapor cloud at the doublebacker caused by oil based lubricants. Properly diluted, it is gluable and printable.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Perishables||lubricity for paper converting|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent liquid|
|pH||9.5 - 10.7|
|Percent Non-Volatile||34.5 - 35.5|
|Brookfield Viscosity (cps, mPa·s)||30 - 100|
Site of Manufacture (and Product Code)
PCL500 should be applied at the wet end of the double backer.
Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.