VaporCoat® 330C

Brand Family Overview

Ecronova™ KDA styrene-acrylic polymer dispersions are ideally suited for architectural coatings on fresh construction materials as well as refurbished building surfaces. Specific grades are designed for paint, primer, and sealer applications. These versatile polymers feature high filler loading tolerance, exceptional penetration into mineral-based substrates, and excellent water and alkali resistance.

See more Ecronova KDA products.


A repulpable, printable and cold set gluable moisture vapor coating. It is commonly used for roll wrap, produce boxes, poultry boxes and anywhere packaged goods require protection from water and or moisture vapor.


Topical MVTR and water resistance coating .

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishablesgrease & oil resistance, MVTR, water resistance

See more products recommended for Industrial.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceGray liquid
pH8.0 - 9.0
Percent Non-Volatile56.8 - 58.2
Brookfield Viscosity (cps, mPa·s) 400 - 600
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

VaporCoat® 330C is best applied by rod coater in-line or off-line at the wet end of the corrugator or by blade at the dry end of the corrugator.


Handle in accordance with good industrial hygiene and safety practice.