DigiPrime® 6611

Brand Family Overview

Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.

See more Ecrovin LV products.


When used for off-line optimizing of paper and synthetic or film, offers improved adhesion properties on certain synthetics, with less need for corona compared to the offline primer DigiPrime® 4431. DigiPrime® 6611 primed surfaces may have a limited shelf life. Typical shelf life is up to 8 weeks but shelf life should be established for each substrate surface and application.


Near line primer for HP Indigo Electroinks.

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
HP Indigo SolutionsApplicator - flexo / gravure/ roll, Substrate - film, Substrate - paper

See more products recommended for HP Indigo Solutions.
Physical Properties

These physical properties are typical but should not be considered specifications.

pH9.5 - 11.5
Shelf Life (mo) 24
Percent Non-Volatile9.0 - 10.0
Brookfield Viscosity (cps, mPa·s) 10 - 30
Spindle Number1

Site of Manufacture (and Product Code)

CIN (DP6611)
AUB (DP6611.E)
SNG (DP6611.S)

Application Data

Since DigiPrime® 6611 is an offline primer, we recommend Flexo or Reverse gravure when applying the primer on the substrate. Wet coat weight to apply may vary, but is typically between 0.8 to 1.2 GSM wet. Refresh with corona discharge may be beneficial for synthetic films. Though coat weight is low, special care should be taken when drying the wet primer film (drying conditions) as well as rewinding an storing the primed reels prior to printing.