Michem® Flex P1309

Brand Family Overview

Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.

See more Ecrovin LV products.

Usage

A primer for film, metalized film, printed film and paper substrates promoting excellent adhesion to extrusion coated resins, resulting in high bond strength for dry and low moisture content products. Michem Flex P1309 creates very strong adhesion between treated film and PE and EVA extrudates.

Description

Water-based primer for polyethylene extrusion and anchor coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Extrusion Coating Primersadhesion for film, adhesion for metal and paper

See more products recommended for Extrusion Coating Primers.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceClear liquid
pH10.0 - 12.0
Percent Non-Volatile4.5 - 5.5
Brookfield Viscosity (cps, mPa·s) 0 - 50
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

SNG (MFP1309.S)

Application Data

Michem® Flex P1309 may applied via flexo, gravure or smooth roll coater. It can be diluted 1:1 with water or with a 50:50 pre-mixture of water and isopropyl alcohol prior to use. It has good compatibility with both Ethanol & Methanol but limited compatibility in IPA solvent. It is recommended that IPA must always be diluted with water before use. It is recommended to corona or flame-treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is highly recommended for application in-line to a target coat weight on film substrates of 0.025 0.075 dry g/m2.

Storage

Handle in accordance with good industrial hygiene and safety practice.