Michem® Flex P1853R
Brand Family Overview
Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.See more Ecrovin LV products.
Promotes excellent adhesion to extrusion coated resins for metal and paper substrates, resulting in exceptionally high bond strength with good water resistance.
Water based primer for extrusion coated resins and treated film substrates.
This product is used in many applications including the following:
|Heat Seal Coatings||metal, Substrate - film|
|Extrusion Coating Primers||adhesion for film, adhesion for metal and paper|
See more products recommended for Heat Seal Coatings.
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|Appearance||White, translucent liquid|
|pH||7.5 - 9.0|
|Percent Non-Volatile||28.0 - 30.0|
|Brookfield Viscosity (cps, mPa·s)||0 - 100|
Site of Manufacture (and Product Code)
Michem® Flex P1853R may be applied via flexo, gravure or smooth roll coater. Dry thoroughly with hot, circulating air. May be used for in-line or off-line processes. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #2 cup = 24.5-26.5 sec.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.