Michem® Flex P2312
Brand Family Overview
Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.See more Ecrovin LV products.
A primer for film, metalized film, printed film, and paper substrates to promote excellent adhesion to extrusion coated resins resulting in high bond strength for dry and low moisture package contents. It creates very strong adhesion between treated film and PE extrudate. It may also be used on film substrates to promote adhesion to liquid top coats such as Michelman heat seal coatings and acrylic coatings.
Water based primer for extrusion coatings and water based coatings.
This product is used in many applications including the following:
|Extrusion Coating Primers||adhesion for film|
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|pH||10.0 - 12.0|
|Percent Non-Volatile||11.0 - 12.0|
|Brookfield Viscosity (cps, mPa·s)||20 - 50|
Site of Manufacture (and Product Code)
Michem® Flex P2312 is designed specifically for use as an extrusion primer. EZ Cup viscosity #2 Cup, 23 25 sec.
Avoid contact with eyes, skin and clothing. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.