Michem® Lube 160RPH

Brand Family Overview

Ecrovin® LV terpolymer dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints while exhibiting excellent weather resistance performance in exterior applications.

See more Ecrovin LV products.

Usage

APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.

Description

Slip and anti-block properties

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Functional Coatingsblock resistance, slip and lubricity

See more products recommended for Functional Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceCream colored, opaque liquid
pH4.0 - 7.0
Percent Non-Volatile24.5 - 25.5
Brookfield Viscosity (cps, mPa·s) <15
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

CIN (ML160RPH)
AUB (ML160RPH.E)
SNG (ML160RPH.S)

Application Data

To be used as additive.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.