Michem® Prime 8515

Brand Family Overview

Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.

See more Ecrovin LV products.

Usage

Michem® Prime 8515 is a low temperature heat seal coating for plastic films for flexible packaging applications. It is optimized to give high hot tack over a wide temperature range. It should be used with the addition of a carnauba wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160PFP.E.

Description

water based heat seal coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Heat Seal CoatingsSubstrate - film

See more products recommended for Heat Seal Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

Appearancetranslucent liquid
pH8.5 - 9.5
Percent Non-Volatile24.2 - 25.2
Brookfield Viscosity (cps, mPa·s) <400
Spindle Number2
RPM60

Site of Manufacture (and Product Code)

AUB (MP8515.E)
SNG (MP8515.S)

Application Data

Michem® Prime 8515 can be applied via flexo , gravure or roll coater.