Michem® Release Agent 4003
Brand Family Overview
Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.See more Ecrovin LV products.
A water based, environmentally friendly mold release for the manufacture of large, molded friction composite materials such as Heavy duty truck shoes, pads and disks. Michem® Release Agent 4003 is designed for release of both metallic and ceramic part formulations with both manual and automated application systems. Residual release agent on the friction material will not interfere with bonding of the composite to the metal back plate. Michem® Release Agent 4003 provides worry free release and surface quality.
Proprietary release blend
This product is used in many applications including the following:
|Die Lubes & Mold Releases||mold release|
See more products recommended for Die Lubes & Mold Releases.
These physical properties are typical but should not be considered specifications.
|pH||6.0 - 8.0|
|Percent Non-Volatile||40.0 - 44.0|
|Brookfield Viscosity (cps, mPa·s)||0 - 250|
Site of Manufacture (and Product Code)
Dilute Michem® Release Agent 4003 with water in accordance with predetermined levels necessary to provide release. Typically, a trial starting dilution of 10 parts water to 1 part release is a good reference. Optimized dilutions can be seen as high as 40:1 to 50:1 when fully integrated. Apply via hydraulic or atomized spray ensuring an even light coat to the mold cavity. Reapply after each molded part.
Handle in accordance with good industrial hygiene and safety practice.