Release Coat® 30
Brand Family Overview
Ecrovin® LV dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints that exhibit excellent weather resistance performance in exterior applications.See more Ecrovin LV products.
A lower solids, economical, one component coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.
One component, water based release coating
This product is used in many applications including the following:
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|Appearance||White, opaque liquid|
|pH||10.0 - 11.0|
|Percent Non-Volatile||29.5 - 30.5|
|Brookfield Viscosity (cps, mPa·s)||300 - 750|
Site of Manufacture (and Product Code)
Release Coat® 30 may be blade or rod applied at the wet or dry end of the corrugator.
Avoid contact with eyes, skin and clothing. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.