VaporCoat® 2200R

Brand Family Overview

Ecrovin® LV terpolymer dispersions are versatile polymer binders with exceptional wet scrub resistance in low VOC interior matte paints while exhibiting excellent weather resistance performance in exterior applications.

See more Ecrovin LV products.


A coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.


MVTR, water and grease resistance coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food ServiceMVTR
Industrialgrease & oil resistance, MVTR
PerishablesMVTR, release with barrier

See more products recommended for Food Service.
See more products recommended for Industrial.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceOff-white liquid
pH8.2 - 9.2
Percent Non-Volatile38.5 - 39.5
Brookfield Viscosity (cps, mPa·s) 100 - 600
Spindle Number3

Site of Manufacture (and Product Code)

CIN (VAP2200R)

Application Data

VaporCoat® 2200R is best applied by rod coater at a rate of 4-7 wet pounds per MSF and as a pre-applied coating or in-line at the wet end of the corrugator or by blade, flexo or gravure at the dry end of the corrugator. EZ Cup Viscosity = 9 - 20seconds, #3 Cup.


Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.