DigiPrime® 4450
Brand Family Overview
FGLASS™ is a versatile family of fiber sizings and film formers used in the manufacturing of both glass fiber and carbon fiber. It is suitable for both chopped strand and continuous fiber applications.
See more FGLASS products.Usage
A ready to use primer which provides excellent adhesion of HP Indigo ElectroInks® to most films and papers. It has exceptional anti-block properties and can be used for two sided printing. It also has food contact approval.
Description
Print receptive primer for HP Indigo ElectroInks®.
Performance Attributes
This product is used in many applications including the following:
| Application | Properties Imparted |
|---|---|
| HP Indigo Solutions | Applicator - flexo / gravure/ roll, OEM - Indigo various presses, Substrate - film, Substrate - paper |
See more products recommended for HP Indigo Solutions.
Physical Properties
These physical properties are typical but should not be considered specifications.
| Appearance | White, translucent liquid |
|---|---|
| pH | 8.0 - 10.0 |
| Percent Non-Volatile | 30.0 - 32.0 |
| Recommended pH Range | >7 |
| Brookfield Viscosity (cps, mPa·s) | <100 |
| Spindle Number | 1 |
| RPM | 60 |
Site of Manufacture (and Product Code)
CIN (DP4450)
AUB (DP4450.E)
SNG (DP4450.S)
Application Data
DigiPrime® 4450 may be applied by flexo or gravure coating systems. Recommended application rate for films is between 0.5 to 0.2 gsm dry coat weight. For paper, slightly higher weights will be needed to overcome the absorption of the substrate, this will vary from paper to paper but dry weights around 0.7 to 1 gsm are recommended. EZ Cup Viscosity - #2 Cup, 22 - 24 sec.
Storage
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.