HydraBan® 410

Brand Family Overview

FGLASS™ is a versatile family of fiber sizings and film formers used in the manufacturing of both glass fiber and carbon fiber. It is suitable for both chopped strand and continuous fiber applications.

See more FGLASS products.


Water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.


Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableswater resistance

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite liquid
pH5.0 - 9.0
Percent Non-Volatile29.5 - 30.5
Brookfield Viscosity (cps, mPa·s) 200 - 600
Spindle Number3

Site of Manufacture (and Product Code)

CIN (HY410)
AUB (HY410.E)

Application Data

HydraBan® 410 can be applied either in-line or off-line at the corrugator, wet or dry end, via rod or blade. EZ Cup Viscosity = 30 - 45seconds, #3 cup.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.