DigiGuard® Gloss 100
Brand Family Overview
Hydrolube® fiber lubricants are used to protect glass fiber and other reinforcing fibers during forming, processing and post-processing. Other attribute enhancing properties vary among the product line.See more Hydrolube products.
A water based, heat resistant, glossy overprint varnish.
Water based overprint varnish
This product is used in many applications including the following:
|Overprint Varnish||Applicator - flexo / gravure/ roll, heat resistance, high gloss|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|Appearance||Light tan liquid|
|pH||8.5 - 9.5|
|Percent Non-Volatile||28.0 - 29.5|
|Brookfield Viscosity (cps, mPa·s)||0 - 200|
Site of Manufacture (and Product Code)
EZ Cup Viscosity = 30 - 40seconds, #2 Cup.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.