Michem® Flex HS 268

Brand Family Overview

Hydrolube® fiber lubricants are used to protect glass fiber and other reinforcing fibers during forming, processing and post-processing. Other attribute enhancing properties vary among the product line.

See more Hydrolube products.

Usage

Used for heat sealing or dry bond lamination applications, offering low temperature seal initiation and stronger bonds to paper, metal (foil or metalized surface), various primed films such as matt, pearlized cavitated BOPP or BOPET films. It should be used with the addition of a wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160 RPH.

Description

Water based dispersion of high molecular weight polyolefin

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Heat Seal Coatingsmetal, Substrate - film, Substrate - paper

See more products recommended for Heat Seal Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite liquid
pH9.4 - 10.5
Percent Non-Volatile36.0 - 39.0
Brookfield Viscosity (cps, mPa·s) 100 - 350
Spindle Number3
RPM50

Site of Manufacture (and Product Code)

CIN (MFHS268)
SNG (MFHS268.S)

Application Data

Michem® Flex HS 268 can be applied via rod, gravure, and spray. The EZ cup viscosity value for a #3 cup is 33 - 35 seconds.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.