PCL 500

Brand Family Overview

Our Hydrosize® line of products includes sizing solutions designed for use in the manufacturing of glass fiber, carbon fiber and natural fiber, using chopped strand or continuous strand fiber glass. These are in turn used to manufacture composite products and components.

See more Hydrosize products.


Designed to reduce hot plate frictional drag and improve board quality, this paper lubricant is applied to linerboard at the wet end of the doublebacker. In addition, PCL500 eliminates the smoky vapor cloud at the doublebacker caused by oil based lubricants. Properly diluted, it is gluable and printable.


Nonionic polyethylene emulsion

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableslubricity for paper converting

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceAmber, translucent liquid
pH9.5 - 10.7
Percent Non-Volatile34.5 - 35.5
Brookfield Viscosity (cps, mPa·s) 30 - 100
Spindle Number2

Site of Manufacture (and Product Code)

CIN (PCL500)
AUB (PCL500.E)

Application Data

PCL500 should be applied at the wet end of the double backer.


Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.