Products

FibreMax® 105B: FibreMax® 105B is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready, fiber treatment that increases the strength of paper and corrugated containers under humid conditions. FibreMax® 105B should not interfere with gluability.

FibreMax® 5000: FibreMax® 5000 is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready fiber treatment with the added benefit of water resistance. FibreMax® 5000 should not interfere with gluability.

HydraBan® 1000AF: HydraBan® 1000AF is an economical water based treatment for kraft paper. It imparts a high degree of water repellency, is printable and gluable.

HydraBan® 708: HydraBan® 708 is an economical, water based treatment for kraft paper. It imparts a high degree of water repellency, is printable and gluable. It can be applied at the wet end or dry end of the corrugator, or with an off-line treating operation.

MaxWhite® 17: MaxWhite® 17 is a white coating designed to offer excellent brightness before and after wax. This product is both hot melt and cold set gluable.

Michem® Coat 1548: Michem® Coat 1548 is a machine ready coating which imparts good water, grease and oil resistance to the substrate. This product has been specially developed for good grease resistance in folded areas.

Michem® Coat 40EAF: Michem® Coat 40EAF is a versatile water resistant coating which demonstrates some grease resistance as well. It is gluable with a wide range of water based and hot melt adhesives.

Michem® Coat 40Y: Michem® Coat 40Y is a versatile water resistant coating. It is gluable with a wide range of water based and hot melt adhesives.

Michem® Coat 82: Michem® Coat 82 is a repulpable, printable, and cold set gluable coating optimized for water resistance and higher COF. It also offers intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal basecoat for other barrier-enhancing Michelman coatings.

Micryl™ 766R: Micryl™ 766R is a water and grease resistant coating that can also function as a heat resistant gloss overprint. In such applications, Micryl™ 766R can be applied to paper (non-clay coated), film or foil, either over or under glycol or wax-free inks. This product is gluable with cold set and hot melt glues.

Micryl™ 783: Micryl™ 783 is an excellent choice when a water and grease resistant coating is required and in-line coating is not possible. It imparts useful levels of gloss and ink protection. This product is gluable with both hot melt and cold set glues.

Nomar® 70AFN: Nomar® 70AFN is a water based, gluable, non-abrasive coating generally used to provide abrasion protection for gas flushed food packaging or small appliances. It is typically applied to the inner package or to shippers and partitions. It contains no fluorocarbon or PFOA. Nomar® 70AFN is gluable with both cold set and hot melt glues.

Nomar® 70THIN: Nomar® 70THIN is a low viscosity, gluable, non-abrasive coating designed for flexo applications. It is generally used to provide abrasion protection for gas flushed food packaging or small appliances. Nomar® 70THIN is gluable with both cold set and hot melt glues.