Multi-Wall Bags

CleanGrip® 111: CleanGrip® 111 is an alumina based, nonskid coating designed to reduce the slipperiness of shipping containers by providing excellent slide angles. CleanGrip® 111 has a low pH that does not resolubilize ink and can prevent ink smearing. This product is gluable with both hot melt and cold set glues.

CleanGrip® 2100: CleanGrip® 2100 is a silica based, sprayable nonskid coating designed to reduce the slipperiness of shipping containers by providing excellent slide angles. Because CleanGrip® 2100 is easily cleanable, it takes the worry and mess out of running nonskids. This product is gluable using both hot melt and cold set adhesives.

GlossCoat™ 100 BL: GlossCoat™ 100BL is a fully formulated, flexo appliable nonskid coating designed for kraft, mottled and bleached substrates.

Michem® Lube 190: Anionic polyethylene wax emulsion

Micryl™ 766R: Micryl™ 766R is a water and grease resistant coating that can also function as a heat resistant gloss overprint. In such applications, Micryl™ 766R can be applied to paper (non-clay coated), film or foil, either over or under glycol or wax-free inks. This product is gluable with cold set and hot melt glues.

Micryl™ 783: Micryl™ 783 is an excellent choice when a water and grease resistant coating is required and in-line coating is not possible. It imparts useful levels of gloss and ink protection. This product is gluable with both hot melt and cold set glues.

Nomar® 70THIN: Nomar® 70THIN is a low viscosity, gluable, non-abrasive coating designed for flexo applications. It is generally used to provide abrasion protection for gas flushed food packaging or small appliances. Nomar® 70THIN is gluable with both cold set and hot melt glues.

SofTak® 126: SofTak® 126 is a gluable nonskid coating with the added benefit of good scuff and water resistance, oil resistance and a "leather like" feel. This product is effective for slip or tier sheets as well as decorative packaging.

SofTak® 1637: SofTak® 1637 is a gluable nonskid coating with the added benefit of good scuff and water resistance, oil resistance and a "leather-like" feel. This product is also effective for slip or tier sheets.

SofTak® 317: SofTak® 317 is a gluable nonskid coating with excellent angle of skid. These properties are useful for slip or tier sheets, or a variety of other applications requiring a non-skid surface.

SofTak® 326: SofTak® 326 is an excellent nonskid coating that also has a fair amount of water resistance. It is often used on slip/tier sheets or a variety of other applications that require a high COF surface.

ThermaGloss® 419: ThermaGloss® 419 is a high heat resistant overprint which imparts excellent gloss to preprinted linerboard while eliminating picking and smearing of the inks through the hot plate section of the corrugator. ThermaGloss® 419 has a reduced angle of skid. ThermaGloss® 419 is not gluable.

ThermaGloss® 420: ThermaGloss® 420 is a high heat resistant overprint which imparts excellent gloss to preprinted liner board while eliminating picking and smearing of the inks through the hot plate section of the corrugator. ThermaGloss® 420 has a reduced angle of skid.

ThermaGloss® 426: ThermaGloss® 426 is a high heat resistant overprint which imparts excellent gloss to preprinted linerboard while eliminating picking and smearing of the inks through the hot plate section of the corrugator. ThermaGloss® 426 has a reduced angle of skid. This product performs similarly to ThermaGloss® 425 but with the added benefit of FDA compliance (see Food Contact Information). ThermaGloss® 426 is not gluable.

ThermaGloss® 460: ThermaGloss® 460 is a low odor preprint coating used for applications where printed / varnished liner must withstand the heat of corrugation process.