Roll Wrap/Ream Wrap


Fine papers are very sensitive to moisture; excessive moisture gain can result in limp, hard-to-process sheets. VaporCoat® helps protect fine papers by adding a moisture barrier to the roll/ream wrapping.

With VaporCoat®, manufacturers can get the MVTR of poly film in a paper-based wrap. Making the switch can have cost advantages, because the price of film is closely tied to the price of oil.

Properties That Affect Roll Wrap

Coating X300™ AF: Coating X300™AF provides high levels of water resistance and good moisture resistance for kraft paper. Coating X300™ AF protects food products from excessive moisture, freezer burn, and sticking. When diluted for mill application, it is an economical sizing agent. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.

Coating X300™ Plus: Coating X300™ Plus provides high levels of water resistance and good moisture resistance for kraft paper with improved water resistance over Coating X300™. Coating X300™ Plus protects food products from excessive moisture, freezer burn, and sticking. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.

VaporBase™ 1065: VaporBase™ 1065 is a primer designed to be used in tandem with the VaporCoat® series of products. VaporBase™ 1065 works to seal the base substrate allowing the top coat to work more efficiently for best MVTR.

VaporBase™ 1075: VaporBase™ 1075 is a primer designed to be used in tandem with the VaporCoat® series of products as well as others. VaporBase™ 1075 works to seal the base substrate and allow for maximum grease and oil resistance and Cobb performance from the top coat.

VaporCoat® 1500: VaporCoat® 1500 is a coating which provides excellent water, oil and grease resistance along with excellent MVTR properties.

VaporCoat® 2200R: VaporCoat® 2200R is a coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.

VaporCoat® 330C: VaporCoat® 330C is a repulpable, printable and cold set gluable moisture vapor coating. Common uses for VaporCoat® 330C include roll wrap, produce boxes, poultry boxes and anywhere packaged goods require protection from water and or moisture vapor.

About Us | Your Competitive Edge | Services | Industry Expertise | Products | Equipment
News & Information | Careers | Contact | Terms of Use and Disclaimer | Privacy Policy | Forms | Compliance with California Law
©2012 Michelman, Inc.
www.michem.com