Brand Family Overview
Michem® Coat water-based coatings are selected primarily for grease and oil resistance. Other benefits include water resistance, release, coldset gluability, hot melt gluability, recyclability, and compliance with specific food contact regulations.See more Michem Coat products.
When used for off-line optimizing of paper and synthetic or film, offers improved water resistance compared to other offline primers such as DigiPrime® 6611 and DigiPrime® 4431. It also provides excellent adhesion of the inks to uncoated, semi-gloss, and glossy paper grades, as well as a wide variety of synthetic and film.
Off-line primer for HP Indigo Electroinks.
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - flexo / gravure/ roll, Substrate - film, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|pH||7.5 - 8.5|
|Brookfield Viscosity (cps, mPa·s)||0 - 100|
Site of Manufacture (and Product Code)
Since DigiPrime® 4462 is an offline primer, we recommend Flexo or Reverse gravure when applying the primer on the substrate. Wet coat weight to apply may vary, but is typically between 0.9 to 1.3 GSM wet. Refresh with corona discharge may be beneficial for synthetic films. Though coat weight is low, special care should be taken when drying the wet primer film (drying conditions) as well as rewinding and storing the primed reels prior to printing.