Brand Family Overview
Michem® Coat water-based coatings are selected primarily for grease and oil resistance. Other benefits include water resistance, release, coldset gluability, hot melt gluability, recyclability, and compliance with specific food contact regulations.See more Michem Coat products.
Imparts a print-receptive surface to film and metalized film substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo WS6000 series Digital Press.
Primer for Digital Printing
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - Indigo ILP station, OEM - Indigo 8000, OEM - Indigo ws6000, Substrate - film|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|pH||9.5 - 11.5|
|Brookfield Viscosity (cps, mPa·s)||8 - 25|
Site of Manufacture (and Product Code)
Used on Indigo WS6000 Digital Press. Clean up must be accomplished with soft water while the applicator roll is still damp. In case the primer dries, residue may be cleaned by scrubbing with soap and water. For hard residues, a mix of caustic solution might be used. Do not diulte.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.