Release Coat® 30
Brand Family Overview
Michem® Coat water-based coatings are selected primarily for grease and oil resistance. Other benefits include water resistance, release, coldset gluability, hot melt gluability, recyclability, and compliance with specific food contact regulations.See more Michem Coat products.
A lower solids, economical, one component coating that provides superior release for a variety of "sticky" products such as hot asphalt. Because it is a one component release system, it eliminates mixing and leftover material disposal. This product is neither hot melt nor cold set gluable.
One component, water based release coating
This product is used in many applications including the following:
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|Appearance||White, opaque liquid|
|pH||10.0 - 11.0|
|Brookfield Viscosity (cps, mPa·s)||300 - 750|
Site of Manufacture (and Product Code)
Release Coat® 30 may be blade or rod applied at the wet or dry end of the corrugator.