DigiGuard® Gloss 110
Brand Family Overview
Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
A high gloss, temperature resistant, water based overprint varnish which meets FDA food contact requirements.
Overprint varnish for flexible packaging
This product is used in many applications including the following:
|Overprint Varnish||Applicator - flexo / gravure/ roll, food packaging, heat resistance, high gloss|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|Appearance||White, translucent liquid|
|pH||8.0 - 10|
|Percent Non-Volatile||38.0 - 40.0|
|Brookfield Viscosity (cps, mPa·s)||<200|
Site of Manufacture (and Product Code)
DigiGuard® Gloss 110 can be applied by flexo, gravure or roll coater. A drying temperature of 60C or above will ensuer optimum heat resistance of the coating is achieved.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.