Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
A print primer which provides excellent adhesion of HP Indigo electro inks to treated films and paper. It adheres well to many synthetics, including soft vinyl. This product is designed for screen printing, but may also be applied via flexo and other methods.
Off-line primer for HP Indigo printability
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - flexo / gravure/ roll, Applicator - screen, OEM - Indigo various presses, Substrate - vinyl|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|Appearance||White to light yellow, opaque liquid|
|pH||8.0 - 9.0|
|Percent Non-Volatile||23.0 - 25.0|
|Brookfield Viscosity (cps, mPa·s)||800 - 1500|
Site of Manufacture (and Product Code)
DigiPrime® 5100 has been developed specifically for screen printing. It may also be applied via flexo, gravure, rod or roll coating systems. For screen printing, the following is recommended: 1. Mesh size: 180 lines per cm/460 lines per inch. 2. Thread diameter nominal: 27 micron 3. Squeegee: 80 Durometer A 4. Tension: 20-30N