Michem® Coat 40 Plus N

Brand Family Overview

Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.

See more Michem Dispersion products.

Usage

A water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.

Description

Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food Servicewater resistance
Perishableswater resistance

See more products recommended for Food Service.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, semi-viscous liquid
pH5.0 - 10.0
Percent Non-Volatile29.0 - 31.0
Brookfield Viscosity (cps, mPa·s) 200 - 800
Spindle Number3
RPM60

Site of Manufacture (and Product Code)

CIN (MC40PLUSN)

Application Data

Michem® Coat 40 Plus N can be applied either in-line or off-line on the corrugator at the wet or dry end, via rod or blade.

Storage

Handle in accordance with good industrial hygiene and safety practice.