Michem® Coat 40 Plus
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
Designed to provide good water resistance to corrugated board while being cold set gluable with most adhesives.
Water resistant, gluable coating
This product is used in many applications including the following:
|Food Service||water resistance|
See more products recommended for Food Service.
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|Appearance||White, semi-viscous liquid|
|pH||8.0 - 10.0|
|Percent Non-Volatile||29.5 - 30.5|
|Brookfield Viscosity (cps, mPa·s)||250 - 450|
Michem ® Coat 40 Plus can be applied either in-line or off-line on the corrugator, wet or dry end, rod or blade.