Michem® Coat 40Y
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
A versatile water resistant coating which is gluable with a wide range of water based and hot melt adhesives.
Water resistant, cold set and hot melt gluable coating
This product is used in many applications including the following:
|Food Service||water resistance|
See more products recommended for Food Service.
See more products recommended for Industrial.
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|Appearance||Milky white, semi-viscous liquid|
|pH||9.0 - 10.0|
|Percent Non-Volatile||34.0 - 36.0|
|Brookfield Viscosity (cps, mPa·s)||250 - 800|
Site of Manufacture (and Product Code)
Michem® Coat 40Y can be applied at the corrugator and off-line using either a blade or a rod coater.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.