Michem® Coat 95

Brand Family Overview

Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.

See more Michem Dispersion products.

Usage

A good multi-purpose coating that provides excellent water, oil and grease resistance. This product is heat sealable and cold set gluable as well.

Description

Water and grease resistant, heat sealable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food Servicegrease & oil resistance, water resistance

See more products recommended for Food Service.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceOff-white liquid
pH8 - 8.6
Percent Non-Volatile46.0 - 48.0
Brookfield Viscosity (cps, mPa·s) 250 - 650
Spindle Number3
RPM20

Site of Manufacture (and Product Code)

CIN (MC95)
AUB (MC95.E)
SNG (MC95.S)

Application Data

Michem®Coat 95 is designed to be flexo or gravure applicable. For use as a heat seal coating on paper at a dry coating weight between 4 - 6gsm is recommended. Typical sealing conditions are 140-200C, 4 bar pressure, 1 sec dwell time. EZ Cup Viscosity = 20 - 40seconds, #3 Cup.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.