Michem® Emulsion 93235
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Textiles & Leather||lubricity for needle and thread, scuff resistance and feel|
|Automotive Care||mar resistance|
|Building Paints||block resistance, lubricity, mar resistance|
|Industrial & Institutional||abrasion resistance, buffability, slip resistance|
|Inks||block resistance, rub resistance, scratch resistance|
|Overprint Varnishes||block resistance, rub resistance, scratch resistance|
|Gloves||block resistance, release|
|Industrial Wood & Plastic||abrasion resistance, block resistance, lubricity, scratch resistance|
|Exterior Wood Protection||block resistance, durability, scratch resistance|
|Thermal Transfer||mar resistance, release|
See more products recommended for Textiles & Leather.
See more products recommended for Automotive Care.
See more products recommended for Building Paints.
See more products recommended for Industrial & Institutional.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Gloves.
See more products recommended for Industrial Wood & Plastic.
See more products recommended for Exterior Wood Protection.
See more products recommended for Thermal Transfer.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 10.5|
|Percent Non-Volatile||34.5 - 35.5|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.