Michem® Flex P1831
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
Promotes adhesion to many extrusion coated resins resulting in high bond strength for film, metal and paper substrates.
Water based primer for liquids and extrusion coated resins.
This product is used in many applications including the following:
|Extrusion Coating Primers||adhesion for film|
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|Appearance||White translucent liquid|
|pH||8.0 - 10.0|
|Emulsifier Charge||Ammoniated dispersion|
|Percent Non-Volatile||27.5 - 29.0|
|Brookfield Viscosity (cps, mPa·s)||<100|
Site of Manufacture (and Product Code)
Michem®Flex P1831 may be applied via flexo, gravure or smooth roll coater. When possible, corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. May be used for in-line or off-line processes. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #3 Cup, 8-13 sec.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.