Michem® Flex HS-333
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
A heat sealable slip coating for paper and metal substrates.
Water based heat seal coating with low coefficient of friction when dried.
This product is used in many applications including the following:
|Heat Seal Coatings||metal, Substrate - paper|
See more products recommended for Heat Seal Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||White, thin, liquid.|
|pH||8.3 - 9.3|
|Percent Non-Volatile||22.3 - 23.3|
|Brookfield Viscosity (cps, mPa·s)||0 - 50|
Site of Manufacture (and Product Code)
1-3 dry g/m2 applied by gravure, dried by forced air, was heat sealable to itself, metals and resins such as Ionomer and Ethylene Vinyl Acetate.
Handle in accordance with good industrial hygiene and safety practice.