Michem® Flex P1852
Brand Family Overview
Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.
See more Michem Dispersion products.Usage
Promotes superior adhesion to extrusion coated resins for film, metal and paper substrates. This product exhibits weatherability, water and chemical resistance to many aggressive package contents such as water, oils, flavors and fragrances. This product is also suitable for resins extruded at low temperatures.
Description
Water based primer for liquids and extrusion coated resins.
Performance Attributes
This product is used in many applications including the following:
Application | Properties Imparted |
---|---|
Extrusion Coating Primers | adhesion for film |
See more products recommended for Extrusion Coating Primers.
Physical Properties
These physical properties are typical but should not be considered specifications.
Appearance | White liquid |
---|---|
pH | 7.7 - 8.7 |
Emulsifier Charge | Anionic |
Percent Non-Volatile | 32.0 - 34.0 |
Brookfield Viscosity (cps, mPa·s) | 0 - 200 |
Spindle Number | 2 |
RPM | 60 |
Site of Manufacture (and Product Code)
CIN (MFP1852)
SNG (MFP1852.S)
Application Data
Michem®Flex P1852 may be applied via flexo, gravure or smooth roll coater. Corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is best for in-line processes, as it may block in rewound rolls. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #2 Cup, 23 - 25 sec.