Michem® Tite 335AF
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
A coating which bonds corrugated to Surlyn or polyethylene skin pack films, firmly trapping the product in between. Provides excellent adhesion to most wax free, water based or litho inks. This product is hot melt gluable.
Skin packing / heat seal coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Percent Non-Volatile||32.3 - 35.3|
|Brookfield Viscosity (cps, mPa·s)||150 - 850|
Site of Manufacture (and Product Code)
Michem® Tite 335AF can be applied to sheeted corrugated using a roll coater. EZ Cup Viscosity = 15 - 35 seconds, #3 Cup. It can also be applied at the dry end of the corrugator.
Handle in accordance with good industrial hygiene and safety practice.