ProHere® L 90013
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
Used as an additive to provide lubricity, block and abrasion resistance and scratch resistance to metal coatings.
Nonionic Fischer-Tropsch wax emulsion
This product is used in many applications including the following:
|Can & Coil||block resistance, lubricity, mar resistance, mold release|
|General Metal||abrasion resistance, block resistance, enhanced lubricity, scratch resistance, torque/tension control|
See more products recommended for Can & Coil.
See more products recommended for General Metal.
These physical properties are typical but should not be considered specifications.
|Appearance||white opaque liquid|
|pH||3.0 - 10.0|
|Percent Non-Volatile||38.0 - 42.0|
|Recommended pH Range||2.0 - 12.0|
|Brookfield Viscosity (cps, mPa·s)||<120|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.